✨ New Arrivals Just Dropped!Explore
HomeStore
LOCTITE 518 Gasket Maker & Flange Sealant for Automotive: Anaerobic, Medium-Strength, Non-Corrosive, Flexes with Movement, Solvent-Resistant | Red, 6 ml Tube (PN: 2203452-2096064)
LOCTITE 518 Gasket Maker & Flange Sealant for Automotive: Anaerobic, Medium-Strength, Non-Corrosive, Flexes with Movement, Solvent-Resistant | Red, 6 ml Tube (PN: 2203452-2096064)
$3.19
Original: $10.64
-70%LOCTITE 518 Gasket Maker & Flange Sealant for Automotive: Anaerobic, Medium-Strength, Non-Corrosive, Flexes with Movement, Solvent-Resistant | Red, 6 ml Tube (PN: 2203452-2096064)—
$10.64
$3.19The Story
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- RELIABLE ADHESION. Forms a flexible, solvent-resistant seal that will not tear or decay. Primarily for use on aluminum, iron & steel flanged mating surfaces.
- FLEXIBLE. Enhances load bearing & shock absorbing characteristics of the bond area. Typically used for Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, O-ring replacement. Replaces almost any cut gasket or coat pre-cut gaskets to increase reliability.
- REMOVABLE WITH HAND TOOLS. Parts disassemble easily, even after extended service, and old gasket material can be removed with a putty knife.
- CONVENIENT CURING. 30 minutes to 4 hours with primer. 4 - 24 hours without primer. Cure speed will depend on the substrate used.
Details & Craftsmanship
Every detail has been carefully considered to bring you the perfect product.
Description
- OEM SPECIFIED. Our LOCTITE automotive aftermarket products are not just OEM-specified, they are also designed by auto manufacturers and lab tested. Wherever engines are being built or repaired, LOCTITE is trusted by professionals.
- RELIABLE ADHESION. Forms a flexible, solvent-resistant seal that will not tear or decay. Primarily for use on aluminum, iron & steel flanged mating surfaces.
- FLEXIBLE. Enhances load bearing & shock absorbing characteristics of the bond area. Typically used for Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, O-ring replacement. Replaces almost any cut gasket or coat pre-cut gaskets to increase reliability.
- REMOVABLE WITH HAND TOOLS. Parts disassemble easily, even after extended service, and old gasket material can be removed with a putty knife.
- CONVENIENT CURING. 30 minutes to 4 hours with primer. 4 - 24 hours without primer. Cure speed will depend on the substrate used.
